Posts Tagged envelope

Plan B Model 10 – Polyphonic Envelope

Plan B Model 10

The PlanB model 10 is a multifunctional module, not only a simple envelope.
The name “polyphonic envelope” does not describe the functions of this great module, the reason why they called it “polyphonic” is because it can output 4 different type of voltage “envelope” at the same time.
In fact the M10 is way more versatile than an envelope, this is really similar to the Bananalogue VCS module, a multitask voltage controlled cv generator .

The main task is the ENVELOPE.
The envelope consist of an AD env with RISE (0.5 ms-5 min attack)and FALL (0.5 ms – 5 min decay/release) controlled not by gate signals but by Triggers.
The attack and decay time can stretched x8 times their duration with the TIMEBASE control knob (so the complete envelope can last from 0.5 milliseconds to 20 minutes).
You can stretch the time manually just turning the knob or controlling it with the VC TB (voltage control timebase).
The VC TB can act in positive or negative, so it can add or subtract.
Than there is the level of the env, which is bipolar too , so it can act as a positive or inverted envelope.
On the left there are the 5 connectors for the 4 different envelopes generated:

  • EOC
  • EOA
  • RAMP
  • 2x AD (with ad contour switch)

The AD acts as the classic “trig” envelope, with 3 different contour (log, lin, exp).
The RAMP is a ramp with rise time 2x the RISE control time.
The EOA is a sustained square which falls when receive a trig and performs the AD cycle  at the “End Of Attack”.
The EOC acts as the EOA but the AD starts at the End Of Contour.

LFO MODE

The rise-fall cycle can be looped and can also work as an lfo.
Using the rise and fall it can produce various waveform between the tri, square, saw, ramp…
The interesting thing is that the timebase knob can control the time of the lfo, so it a vc lfo, the other thing that can lead to creative results is the fact that the rate of the lfo is not controlled by the timebase only, but it ’s a mix of the rise and fall time.
So the shorter is the R&F the faster will be the lfo rate.

VCO MODE

The third interesting mode is the vco function.
The module has a  triangle-core , so it can sound useful even as a vco.
To get the vco mode  you have to switch into LFO and use fast R&F time and “tune” the oscillator with the timebase function and VC TB to control it with a keyboard cv.
It does not reach very high frequencies but can be used on the low and mid range as an audio modulator or a audio source.

TIPS:
I noticed two useful tips:

  • As the core is a TRI-core the envelope create a sort of clip when, reached the max value,start the fall.
    To avoid the clip it’s useful to use a lowpass filter post the VCA.
  • In LFO mode don’t connect any source to the trig in because the summing of the two sources can damage the module , too high voltage!

Comments (1)

Eurorack modular vs Roland System100 Mod-102 (Part 1)

Roland System100 Mod-102

Roland System100 Mod-102

As I described some days ago , I’m building a little modular in eurorack format to have a little versatile synth to make modular sounds easy, and to expand my system of vintage semimodular synths:

  • Roland System100 MOD-102
  • Korg MS-20
  • Korg MS-50
  • Korg PS-3100

The Korgs work well altogether as they use the same korg “standars” as 1/4″ plugs, hz/volt , etc.
The system is well balanced and is very versatile , there are no tuning problems and connections between one module and the other has no need of attenuators and result open to every use.

Eurorack and Roland System 100 patched togheter

Eurorack and Roland System 100 patched togheter

The Roland System 100 is quite different, it uses 3,5mm plugs, 1volt/oct and is quite difficult to make it interact with the Korgs even because the sound of the Roland is “stronger”.
After analizing different solutions (the first was to buy the other parts : mod 101 the keyboard, the sequencer and the mixer, while the second was to buy a System100m…) I decided to buy an eurorack to have a synth easier to control with computers and midi devices , more stability and however the freedom to build a synth choosing every part.
The result is, as I described, a synth with basic elements that are quite different from the “new analog” I own (DSI Evolver desktop and Studio Electronics ATC1 and SE1), but quite versaatile for a wide range of sound including FM modulations.

The first thing I tried is the interfacing between the Eurorack and the Roland and I was surprised they interact very well .
The Midi-CV interface works very well with the System100 too (I use a Kenton Pro 2000 for it, usually..).

MFB VCO (OSC-02)

MFB VCO (OSC-02)

The first thing I tried was to compare the Roland VCO with the MFB VCOs and I was quite surprised.
The Roland is really thick on the lower frequencies, and the square waves are awesome , but the MFB is really good too and they have a similar sound in many ways.
The MFB is less deep , especially when you hear in A->B comparison , and a little darker on the highest frequencies, but does a really a well job fattening the System100 sound without sounding different.

Roland System100 filter section

Roland System100 filter section

What makes the BIG difference is the Roland Filter.
Using only the MFB VCO in the roland path , with the roland VCO with zero volume, the result is amazing.
The VCO sound smooth and rich, really fat on the lower range and really harmonic and “creamy” in the higher register.
The big difference is evident in the lead sounds, they sound smooth with big carachter and warm sound without being harsh or disturbing but always rich of mid and high harmonics.
As the resonance grows the sound became quite acid (the typical roland filter carachter) but with growing harmonics, and a massive warm sound.

Then I tried to use the MFB dual ADSR to compare the behaviour of the two type of env and even here the different is evident.The Roland one is FAST and SNAPPY but always “rounded”, more musical, and gives the synth the classic Roland touch.
The MFB ENV is really fast, maybe faster than the Roland, but also more angular, with the attacks at zero makes a “ping” sound at the trig of the note.
Maybe the voltage that this env produce is higher and should be attenuated to get more musical results, even if  the different behaviour is really interesting to get different result.
The first thing done was a sequenced upright bass that sounded really awesome.

Eurorack and Roland System100 patched togheter

Eurorack and Roland System100 patched togheter

I did the same sound using only the eurorack and the sound was similar but more enarmonic, the reason is without any doubt the different between the two filters.

Comments (1)

MFB Dual ADSR review

MFB Berlin started with simples and cheap drum machines and the Synth-lite, a DCO based Moog Prodigy clone.
With the Eurorack explosion MFB started producing modules derived from their synths and drums.

The latest creations are the semimodular synth Kraftzwerkg and his brother Schlagzwerg, a semimodular drumcomputer.
MFB built this two semimodular using the modules they produce in eurorack.

The DUAL ADSR

First this module is not a classic ADSR but an AHDSR, in fact after the attack there is a HOLD!
The HOLD is really useful for “sequencer sounds”, you can turn every knob to 1 and just use the hold to control the duration of the sound.

MFB Dual ADSR

MFB Dual ADSR

It can be useful also for a smoother change between the attack and the decay curves to get a rounded tones.
The Dual Env is an EXPONENTIAL ENVELOPE, but has a switch wich let you decide if one of the two can act in LINEAR mode.
When the env act in linear mode even the hold changes its behaviour shaping the sound in a more “angular” way.

An interesting add tipical of MFB modules is the buss control, so you don’t have to connect the midi-to-cv interface to send the gate signals to the gate in socket in the envelope module, it uses the buss connection, and I find it really useful.
An other useful thing is that every env has 2 cv out, so if the patch is not too complex you don’t need a multiply module.

There’s no switch to choose a fast or slow behaviour as in the Doepfer Envelope, but the Dual env is really snappy and has a really fast attack time.

For synthetizing percussions and especially Kick drums this env is top!
It can get rounded kicks but also hard edge sounds.
Using the HOLD can lead to interesting results programming drum sounds.
With the hold we can create a “slightly compressed” kick with a fast decay, so the sound get fatter and the peak is less accentuated.

Programming bass sound it can result both smooth or percussive.
Using the linear mode for the filter env the result is a percussive “angular” bass , while using both exp the sound plays smoother.

All in all this module is quite cheap (98 euros in EU) , works really well and has its own carachter.
For me is  a really good buy!

MFB Synth Berlin

Leave a Comment